|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
spec no. tq3c-8eaf0-e1ddp54-00 ? s p e c date september 2, 2008 t y p e : t c g 0 5 7 v g l b a - h 5 0 < 5.7 inch vga transmissive color tft with led backlight> c o n t e n t s 1. application 2. construction and outline 3. mechanical specifications 4. absolute maximum ratings 5. electrical characteristics 6. optical characteristics 7. interface signals 8. input timing characteristics 9. backlight characteristics 10. lot number identification 11. warranty 12. precautions for use 13. reliability test data 14. outline drawing kyocera corporation ? kagoshima hayato plant lcd division ? ? ? this specification is subject to change without notice. consult kyocera before ordering. designed by: engineering dept. confirmed by: qa dept. original issue date prepared checked approved checked approved september 2, 2008 sep.5,2008 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page - warning 1. this kyocera lcd module has been sp ecifically designed for use only in electronic devices and industrial mach ines in the area of audio control, office automation, industrial control, home appliances, etc. the module should not be used in applications where the highest level of safety and reliability are required and module fa ilure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. customer agrees to indemnify, defend and hold kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of customer's use, or sale for use, or kyocera modules in applications. caution 1. kyocera shall have the right, whic h customer hereby acknowledges, to immediately scrap or destroy tooling for kyocera modules for which no purchase orders have been received from the customer in a two-year period. www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page - revision record designed by : engineering dept. confirmed by : qa dept. date prepared checked approved checked approved rev.no. date page descriptions www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 1 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1. application this document defines the specification of TCG057VGLBA-H50. (rohs compliant) 2. construction and outline lcd backlight system polarizer additional circuit : transmissive color dot matrix type tft : led : glare low-reflection treatment : timing controller, power supply (3.3v input) (without constant current circuit for led backlight) 3. mechanical specifications item specification unit outline dimensions 127.2 (w) 100.4 (h) 5.7 (d) mm active area 115.2 (w) 86.4 (h) (14.4cm / 5.7 inch (diagonal)) mm dot format 640(b,g,r) (w) 480 (h) dot dot pitch 0.06 (w) 0.18 (h) mm base color *1 normally white - mass (tbd) g *1 due to the characteristics of the lcd material, the color varies with environmental temperature. www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 2 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 4. absolute maximum ratings 4-1. electrical absolute maximum ratings item symbol min. max. unit supply voltage for logic v dd 0 4.0 v input signal voltage *1 v in -0.3 6.0 v led forward current *2 if - 30 ma reversed voltage *2 vr - 5 v ? ? ? *1 input signal : ck, r0 ? r5, g0 ? g5, b0 ? b5, h sync , v sync , enab, r/l, u/d *2 for each ?an1-ca1?, ?an2- ca2?, ?an3-ca3? and ?an4-ca4? temp. = 25c 4-2. environmental absolute maximum ratings item symbol min. max. unit operating temperature *1 t op -20 70 c storage temperature *2 t sto -30 80 c operating humidity *3 h op 10 *4 %rh storage humidity *3 h sto 10 *4 %rh vibration - *5 *5 - shock - *6 *6 - *1 operating temperature means a temperature which operation shall be guaranteed. since display performance is evaluated at 25c, another temperature range should be confirmed. *2 temp. = -30c ? 48h , temp. = 80c ? 168h ? ? ? store lcd panels at normal temperature/humidity. keep them free from vibration and shock. an lcd panel that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard. ? (please refer to ?precautio ns for use? for details.) ? ? ? ? *3 non-condensing ? *4 temp. ? 40c, 85%rh max. ? ? temp. ? 40c, absolute humidity shall be less than 85%rh at 40c. ? *5 ? ? frequency 10 ? 55 hz vibration width 0.15mm acceleration value (0.3 ? 9 m/s 2 ) interval 10-55-10 hz ? minutes ? ? ? ? ? ? ? 2 hours in each direction x, y, z (6 hours total) ? ? ? ? ? ? ? eiaj ed-2531 ? *6 acceleration: 490 m/s 2 , pulse width: 11 ms ? 3 times in each direction: x, y, z ? ? ? eiaj ed-2531 www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 3 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 5. electrical characteristics ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? temp. = -20 ? 70c item symbol condition min. typ. max. unit supply voltage for logic *1 v dd - 3.0 3.3 3.6 v current consumption for logic i dd *2 - 170 220 ma permissive input ripple voltage v rp - - - 100 mvp-p v il "low" level 0 - 0.3v dd v input signal voltage *3 v ih "high" level 0.7v dd - v dd v *1 v dd -turn-on conditions ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0 ? t1 ? 20ms ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0 ? t2 ? 50ms ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0 ? t3 ? 1s *2 display pattern: v dd = 3.3v, temp. = 25c 123 456 789 ~~~~~~~~~~~~~~~ 1918 1919 1920 (dot) ? 1 2 3 : : : 479 480 (dot) ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? *3 input signal : ck, r0 ? r5, g0 ? g5, b0 ? b5, h sync , v sync , enab, r/l, u/d v dd 3.0v 3.0v 0.3v t1 t2 t3 signal *3 www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 4 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 6. optical characteristics ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? measuring spot = 6.0mm, temp. = 25c item symbol condition min. typ. max. unit rise r = =0 - 10 - ms response time down d = =0 - 25 - ms upper - 80 - lower - 80 - deg. left - 80 - viewing angle range view direction : 6 o?clock (gray inversion) right cr ? 5 - 80 - deg. contrast ratio cr = =0 300 500 - - brightness l if=15ma/line (260) (370) - cd/m 2 x 0.56 0.61 0.66 red y = =0 0.32 0.37 0.42 x 0.29 0.34 0.39 green y = =0 0.52 0.57 0.62 x 0.09 0.14 0.19 blue y = =0 0.06 0.11 0.16 x 0.27 0.32 0.37 chromaticity coordinates white y = =0 0.29 0.34 0.39 - 6-1. definition of contrast ratio cr(contrast ratio) 1 brightness with all pixels "white" brightness with all pixels "black" 6-2. definition of response time 90./;5,:: ? + ? 9 /0;, 3(*2 /0;, www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 5 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 6-3. definition of viewing angle ? 6-4. brightness measuring points 1) rating is defined on the average in the viewing area. 2) measured 30 minutes after the led is powered on. (ambient temp. = 25c) ?? ? ?@ @ ? ?? ? ?@ ? ?+09,*;065 ?+09,*;065 @ (dot) (dot) 3 03 03 0 0 1 2 3 4 5 www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 6 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 7. interface signals no. symbol description i/o note 1 gnd gnd - 2 ck clock signal for sampling each data signal i 3 h sync horizontal synchronous signal (negative) i 4 v sync vertical synchronous signal (negative) i 5 gnd gnd - 6 r0 red data signal (lsb) i 7 r1 ? red data signal i 8 r2 ? red data signal i 9 r3 ? red data signal i 10 r4 ? red data signal i 11 r5 ? red data signal (msb) i 12 gnd ? gnd - 13 g0 ? green data signal (lsb) i 14 g1 ? green data signal i 15 g2 ? green data signal i 16 g3 ? green data signal i 17 g4 ? green data signal i 18 g5 green data signal (msb) i 19 gnd ? gnd - 20 b0 ? blue data signal (lsb) i 21 b1 ? blue data signal i 22 b2 ? blue data signal i 23 b3 ? blue data signal i 24 b4 ? blue data signal i 25 b5 ? blue data signal (msb) i 26 gnd ? gnd - 27 enab signal to settle the hori zontal display position (positive) i *1 28 v dd ? 3.3v power supply - 29 v dd ? 3.3v power supply - 30 r/l horizontal display mode select signa l l : normal , h : left / ri g ht reverse mode i *2 31 u/d vertical display mode select signa l h : normal , l : u p / down reverse mode i 32 nc ? no connect - 33 ca1 ? cathode 1 - 34 ca2 ? cathode 2 - 35 ca3 ? cathode 3 - 36 ca4 ? cathode 4 - 37 an1 ? anode 1 - 38 an2 ? anode 2 - 39 an3 ? anode 3 - 40 an4 ? anode 4 - ? ? ? ? lcd connector imsa-9681s-40a-gf (iriso) ? ? ? ? recommended matching ffc or fpc 0.5mm pitch www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 7 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? *1 the horizontal display start timing is settled in accordance with a rising timing of enab signal. in case enab is fixed "low", the horizontal start timing is determined. don't keep enab "high" during operation. *2 r/l = l ? ? ? ? ? ? ? ? ? ? ? r/l = h u/d = h ? ? ? ? ? ? ? ? ? ? u/d = h r/l = l ? ? ? ? ? ? ? ? ? ? ? r/l = h u/d = l ? ? ? ? ? ? ? ? ? ? u/d = l www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 8 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 8. input timing characteristics 8-1. timing characteristics item symbol min typ max unit note frequency 1/tc 25.18 28.88 mhz clock duty ratio tch/tc 40 50 60 % set up time tds 10 ns data hold time tdh 10 ns 30.0 31.8 s cycle th 770 800 900 clock pulse width thp 5 30 clock set up time ths 10 ns horizontal sync. signal hold time thh 10 ns cycle tv 515 525 560 line pulse width tvp 1 3 5 line set up time tvs 10 ns vertical sync. signal hold time tvh 10 ns pulse width tep 640 clock set up time tes 10 ns enable signal (enab hold time teh 10 ns h sync - enable signal phase difference the 112 144 175 clock h sync - v sync signal phase difference thv 10 ns vertical sync. signal start position tve 2 35 76 line horizontal display period thd 640 clock vertical display period tvd 480 line *when enab is fixed at "low", th e horizontal display starts from the data of c144 (clock) as shown in 8-3. *when enab is fixed at "low", the vertical sync. signal start position is 35 (line) as shown in 8-3. *in case of lower frequency, the deterioration of the display quality, flicker etc., may occur. 8-2. input data signals and display position on the screen ? ? ? ?o ?o ?o ? ? ? ? www.datasheet.co.kr datasheet pdf - http://www..net/ spec no. tq3c-8eaf0-e1ddp54-00 part no. TCG057VGLBA-H50 page 9 m019070 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 8-3. input timing characteristics ? *1 when enab is fixed at "low", the horizontal display starts from the data of c144 (clock). ? *2 when enab is fixed at "low", the vertical sync. signal start position is 35 (line). 9. backlight characteristics led ratings item symbol min. typ. max. unit note forward current *1 if - 15 - ma ta=-20 ? 70c - 22.1 25.0 v if=15ma, ta=-20 ? - 21.7 24.5 v if=15ma, ta=25 ? forward voltage *1 vf - 21.3 24.1 v if=15ma, ta=70 ? operating life time *2, *3 t - 37,000 - h if=15ma, ta=25 ? *1 for each ?an1-ca1?, ?an2-c a2?, ?an3-ca3? and ?an4-ca4? *2 when brightness decrease 50% of initial brightness. *3 life time is estimated data . (condition : if=15ma, ta=25 ? in chamber). * an input current below 5.0ma may reduce the brightness uniformity of the led backlight. this is because the amount of light from each led chip is different. therefore, please evaluate carefully before finalizing the input current. (;( ? 5()3, ?:0.5(3 ? ? e ? 690a65;(3 ?:@5* ? ? ? e ? 7 ? ? : ? */ ? +: ? +/ ? ? ? ? y ? ? ,9;0*(3 ?05=(30+ ?+(;( ?7,906+ ? ? : ? + ? 7 ? 7 ? ? ? ? + ? ? ? ? ? ? ? 36*2 ?:05.(3 ? ? e ? (;( ?:0.5(3 ? ? ? ? ? ? ? e ? (;( ? 5()3, ?:0.5(3 ? ? e ? ,9;0*(3 ?:@5* ? ? :0.5(3 ? ? e ? 690a65;(3 ? @5* ? ?:0.5(3 ? ? e ? (;( ?:0.5(3 ? ? ? ? ? ? ? e ? ,9;0*(3 ?05=(30+ ?+(;( ?7,906+ ? number of h-data |